
Full topsheet of one ski with a binding shown mounted
Van Deer2026/27
H-Power 68
- Waist
- 68 mm
- Turn radius
- 13 m
- Tip / tail
- 115 / 97 mm
- Weight
- 3,780 g / pair
- Terrain
- piste
- Audience
- unisex
Ability
- Beginner (not recommended)
- Intermediate
- Advanced
- Expert
Overview
The H-Power 68 is a narrow, metal-laminate carving ski developed with Marcel Hirscher, for skiers whose day is about turning on groomed slopes. Van Deer positions it for hard-packed pistes and every turn shape from short slalom-style arcs to longer giant-slalom turns, and says it is meant for both strong recreational skiers and experts. For 2026/27 it is sold as a new model with Marker's FDT plate and a new black design.
Its construction explains its character. An ash and poplar wood core sits between two layers of titanal, a combination that adds damping and torsional stiffness so the edge stays locked on firm snow and the ski feels calm rather than nervous at speed. ABS sidewalls carry pressure straight to the edge, and Van Deer delivers the race-style base with a model-specific factory tune. The 68 mm waist means very little lever arm between boot and edge, so it moves from edge to edge quickly and tips onto high angles easily. Its sidecut tightens markedly in the shorter sizes, so small skiers get a ski that wants short turns, while the longest sizes are built for longer, faster arcs.
It suits confident intermediates and stronger skiers who ski mainly on prepared pistes and want precise, energetic carving. The two sheets of metal make it more demanding than a soft beginner carver, rewarding active skiing rather than passive steering. It is a poor choice for powder, bumps or unprepared snow. The ski comes with a Marker FDT plate; bindings are selected separately.
Construction & features
What the H-Power 68 is built from, and what that means on snow.
- 01
Two layers of titanal
Titanal sheets above and below the wood core add damping and torsional stiffness. The ski holds its edge on hard-packed snow and stays composed at speed, but needs a skier who actively loads it.
- 02
Ash-poplar wood core
Ash is a dense, strong hardwood and poplar a lighter, springy one; combined, they give rebound and a smooth flex between the metal layers. Van Deer credits the construction with direct power transmission and a smooth ride.
- 03
ABS sidewalls
Impact-resistant ABS sidewalls run along the edges, transmitting pressure from the boot directly to the steel edge and protecting the core. Van Deer links them to quick edge-to-edge transitions and precise turn initiation.
- 04
Race base
Van Deer describes a race-style base intended for precise preparation. Regular waxing and edge care help maintain its glide and edge performance.
- 05
Model-specific factory tuning
Van Deer says each ski leaves the factory with a reproducible, model-specific tune, so it is ready for precise carving without extra preparation; later servicing can change it.
- 06
68 mm carving waist and sidecut
The narrow waist keeps edge changes quick and puts the edge close to the boot for grip. The sidecut radius tightens in shorter lengths and opens up in the longest sizes, so length choice also chooses the preferred turn size.
- 07
Marker FDT plate
The ski comes with a Marker FDT plate. Van Deer offers the Comp 13 FDT GW binding as an option, and its shop also allows the ski to be ordered without bindings.
Tests & reviews
Independent tests of this model and season.
No independent tests are linked for this ski yet.
Ski quiz
Not sure the H-Power 68 suits your skiing?
Answer a few questions to check its match to your skiing and explore other options.
Similar skis
Close to the H-Power 68 at 168 cm.





