
Full topsheet pair
Lib Tech2026/27
Backwards
- Waist
- 92 mm
- Turn radius
- 17 m
- Tip / tail
- 123 / 117 mm
- Weight
- 2,994 g / pair
- Terrain
- all-mountain
- Audience
- unisex
Ability
- Beginner (not recommended)
- Intermediate
- Advanced
- Expert (not recommended)
Overview
The 2027 Lib Tech Backwards is a park-and-pipe ski that Lib Tech calls its best-selling park slayer, built with an H-Pop core. It is made for lift-accessed park laps, with a freestyle contour, a press-friendly jib focus and a long camber pocket underfoot.
The core is locally harvested Makah hemlock, which Lib Tech credits with compression strength, pop and durability, topped with thin tri-axial and bi-axial fiberglass. Thicker steel edges and thicker sintered, sublimated bases are built for the abuse of steel park features, and Magne-Traction serrated edges add edge hold on a flat-lift early-rise camber contour. The pocket of camber underfoot gives pop, the rise at the tip and tail helps with pressing and pivoting, and the flex is 5 to 6 out of 10 across three lengths of 166, 172 and 178 cm with 17 to 19 m radii.
It suits intermediate to advanced park skiers who need a durable, forgiving ski for rails and other steel park features and who value twin-tip handling. At a 92 to 94 mm waist and with a soft-to-medium flex, it is not a powder ski or a stable high-speed all-mountain ski, so skiers who want a single ski for the whole mountain are better served by a wider UFO.
Construction & features
What the Backwards is built from, and what that means on snow.
- 01
H-Pop hemlock core
A core of locally harvested Makah hemlock, which Lib Tech credits with incredible compression strength, pop and durability, helping the ski survive repeated landings and hard use.
- 02
Flat-lift early-rise camber contour
A freestyle contour with a long camber pocket underfoot and early-rise tip and tail sections, so the ski pops off features, presses easily and spins, while staying stable underfoot.
- 03
Thicker steel edges and base
Lib Tech uses thicker steel edges and thicker sintered, sublimated bases on this ski, built to withstand steel rails and park wear.
- 04
Tri-axial and bi-axial fiberglass
Thin, light woven fiberglass layers over the core add torsional stiffness and flex control without a metal layer, keeping the ski lightweight.
- 05
Magne-Traction serrated edges
The edge is serrated, like a steak knife, instead of a single smooth line, so it can bite hard snow at several points. Lib Tech says this lets the edges be detuned for sliding rails and other hard features while still holding on ice.
Tests & reviews
Independent tests of this model and season.
No independent tests are linked for this ski yet.
Ski quiz
Not sure the Backwards suits your skiing?
Answer a few questions to check its match to your skiing and explore other options.
Similar skis
Close to the Backwards at 166 cm.
LINEHoney Badger92 mm · All-mountain · 2026/27
RossignolSENDER SOUL 92 OPEN92 mm · All-mountain · 2026/27
RossignolRALLYBIRD SOUL 92 OPEN92 mm · All-mountain · 2026/27
RossignolMen's SOUL 92 OPEN92 mm · All-mountain · 2026/27
RossignolWOMEN'S SOUL 92 OPEN92 mm · All-mountain · 2026/27
LINEPandora 9292 mm · All-mountain · 2026/27
ArmadaEDOLLO 9191 mm · All-mountain · 2026/27
DynastarM-Pro 94 Ti Open92 mm · All-mountain · 2026/27
DynastarM-Pro W 92 Open92 mm · All-mountain · 2026/27